Products
American Jail Products, L.L.C is a provider for all jail equipment.
Some of the jail and correctional furnishings and accessories that we provide are: bunks, desks, tables, stools, pistol lockers, key Cabinets, pass Through, key Drops, food Pass, etc. We also provide hollow steel doors and frames, all grille work, woven rod screen and personal gates, manual tracks, access doors, steel plate ceiling system, structure steel and any custom steel work.
Click here to view all products
SECURITY DOORS AND WALL SYSTEMS
POPULAR PRODUCTS :
Heavy Duty-Steel Door
The main frame is fabricated from 2 x 1 x 3/16 inch steel channel on all 4 edges (doors with lock box shall have 2 1/2 inch steel bar on lock edge and steel channel on the rest of perimeter). 2 x 1 x 3/16 steel channel stiffener shall be extended horizontally full width of the door in 4 locations minimum. The main frame is welded to 1/8 inch thick single sheet steel panel; plug weld the other panel to framing. The door is fully insulated. Preparation for hardware, food passes, observation panels and other accessories as required.
Heavy Duty Door Frame
The frame is fabricated from 3-sided structural channel (6 or 8 inch) with 1 112 x 3/4 inch steel bar stop plug welded to channel. The frame is provided with 2 x 1/4 inch x 8 inch long anchors (4 per jamb) adjustable for masonry type walls and fixed for concrete wall. 1 clip angle is provided to the back bottom of each jamb for floor anchoring.
View Products
Grating Door
The grate door is fabricated from mild steel (tool resistant optional) 7/8 inch diameter double ribbed round bars spaced 4 inches on center. Vertical and horizontal flat framing bars and horizontal intermediate interlocking flat bars spaced 12 inches on center complete the assembly. The vertical round bars are positively interlocked at each intersection of horizontal bars. The vertical round bars pass through and securely attach to the top and bottom horizontal framing bars. Lock pockets, food passes or other accessories as required.
View Products
Grating Wall
The grate wall is fabricated from mild steel (tool resistant optional) 7/8 inch diameter double ribbed round bars spaced 4 inches on center. Vertical and horizontal flat framing bars and horizontal intermediate interlocking flat bars spaced 12 inches on center complete the assembly. The vertical round bars are positively interlocked at each intersection of horizontal bars. The vertical round bars pass through and securely attach to the top and bottom horizontal framing bars. Reinforcement for food passes, accessories, lock pockets as required.
View Products
Perforated Plate Door
Doors are fabricated from 3/16 perforated plate face welded to 2 x 2 x 3/16 mild steel reinforcing tube at edges and mid point where required. Reinforcement for food passes, accessories, hinges and lock pockets as required.
View Products
Guard Screen Door
Doors are fabricated from tubular 12 GA mild steel main frames, and 3/8 inch diameter by 2 inch on center double crimped woven rod panels. Concealment plates of 12 gauge mild steel are welded to the framework. Lock pockets, food passes or other accessories as required.
View Products
Guard Screen Wall
Guard screen walls are fabricated from tubular 12 GA mild steel main frames with 3/8 inch diameter by 2 inch on center double crimped woven rod panels. Concealment plates of 12 gauge mild steel are welded to the framework. Guard screen is attached to masonry or concrete walls with standard anchors.
Plate Wall
Steel plate walls are fabricated from 3/16 inch thick mild steel plate with integral or attached stiffeners as required. Openings for wall accessories are factory prepared where feasible. Other openings are field cut to accommodate project requirements. Steel trim and supports are provided at the floor, ceiling and intermediate seams. All together to provide a secure assembly.
Note: ceiling pans are constructed similarly.
View Products
Heavy Duty Steel Wall
Heavy duty steel wall panels are fabricated from 10 GA mild steel skins on 2 x l x 3/16 channel internal reinforcing and sound insulation. Finished wall is approximately 2 1/4 inches thick panels are designed to accept a compliment of accessories and door applications. Heavy duty wall panels are designed and fabricated to suit requirements.
View Products
Perforated Plate Wall
The perforated plate wall is fabricated from 3/16 inch thick steel perforated with 112 inch diameter holes spaced 1/ 16 inch on center horizontally and diagonally. Perforated plate panels are fabricated as single units where possible. Opening for wall accessories are factory prepared where feasible. Other openings are field cut to accommodate project requirements. Steel trim and supports are provided at the floor, ceiling and intermediate seams. All together to provide a secure assembly.
Note: ceiling pans are constructed similarly.
View Products
No. 102 Hinged Access Panel
Size: as required
Fabricated from 3/16 inch mild steel plate with 1 3/4" flange all around, prepared for mech-lock and two #3 hinges
Frame: 3 inch x 2 inch x 3/16 inch mild steel angle
View Products
No. 101 Lift-Out Access Panel
Size: as required
Fabricated from 3/16 inch mild steel plate
Frame: 3 inch x 2 inch x 3/16 inch mild steel angle
The panel will be fastened with button head security screws
(Mech-lock is optional)
View Products
No. 3BI Privacy Screen
Size: as shown above fabricated from 10 GA mild steel perforated plate 6 inches on center (solid plate is optional), stiffened top and bottom with 14 GA u-edging. Vertical supports: 2 x 2 x 3/16 inch angle with floor plate. Installation by bolting to floor and ceiling.
N10. 371 Speaking Device
Size: 6 inch diameter.
Fabricated from 10 GA stainless steel, 6 inch diameter cover plate with each side perforated with 3/8 inch holes. 12 GA plate 2 7/8 inch diameter baffle and stainless steel wire cloth. Screens are attached to spacer bar between the face plates. Neoprene gasket will be applied to the inside of the face plates and provided with security screws.
View Products
No. 401 Mechanical Grille
Grilles are fabricated from 7/8 inch diameter double ribbed mild steel bars spaced on 4 inch centers. (tool resistant is optional) intermediate members are mild steel flat bars spaced 12 inches on centers. Frame is fabricated from 3/16 bent plate. NO. 402 SECURITY MESH VENT Fabricated from 10 GA mild steel face plate and 10 GA wire cloth securely welded to face plate 10 GA mild steel sleeve is optional to fit pre-existing penetration.
View Products
No. 402 Security Mesh Vent
Fabricated from 10 GA mild steel face plate and 10 GA wire cloth securely welded to face plate 10 GA mild steel sleeve is optional to fit pre-existing penetration.
View Products
No. 403 Plate And Mesh Vent
Fabricated from 10 GA perforated face plate. The holes are 2 inches square 2 1/2 inches, on center.
10 GA wire cloth is securely welded to face plate.
A perforated 10 GA back plate will be welded as shown.
10 GA mild steel sleeve is optional; to fit pre-existing penetration.
View Products